Parker Air Filter
Parker Pharmacetical Filter
Tygon® Tubing
Pharmed® Tubing
Bio & Pharmacetical Tubing
Medical Tubing
Norprene® Tubing
Fluran® Tubing(viton Tubing)
Tygon® Silicone Tubing
Teflon Tubing
Flanged Tubing
PEEK™ & PEEKsil™ Tubing
Stainless Steel Tubing
Capillary Tubing
Mitos-R Hose
Mitos-W Hose
Mitos-WCO Hose
Miniature Pumps
Inchpore® Syringe filter
Inchpore2® Syringe filter
Inchpore® Membrane Filter
Auto Sampler Vial Cap & Septa
Headspace용 Septa
New objective
안정성 시험챔버
광안정성 시험챔버
사이클 시험챔버
UPS(무정전 동력공급장치)
Miniature Pumps
Precision Syringe Pump Micro Pumps (air/gas) Mini Pumps (air/gas)
Mini Pumps (liquids) High Capacity Pumps (air/gas)  

High Flow Diaphragm Pumps (air/gas)  
Highly efficient, high capacity, compact design pumps - Up to 66 LPM

Typical Markets:
  • Respiratory
  • Agent Detection
  • Clinical Diagnostics
  • Typical Applications
  • Portable Aspirators
  • Wash and Waste Circuits
  • Transport Ventilators
  • Medical Instruments
  • Air-over-liquid or Vacuum
        Pressure Supply
  • Industrial Agent Detection
  • Parker’s T2-01 series are high performance and high efficiency
    diaphragm pumps. Compact and lightweight package configurations
    make the T2-01 series the technology of choice for fixed and portable
    high-capacity air and gas applications.
  • Parker’s patented highly efficiency dynamic valve design provides
        high capacity in a compact package
  • Pumps provide up to 32LPM in a single head version and 66 LPM in
        a dual head version
  • Provides the highest flow rates available with lowest power
  • The most compact and lightweight package within its performance
  • RoHS compliant.

  • Product Specifications
    Physical Properties
    Operating Environment1:
    32 to 122°F (0 to 50°C)
    Storage Environment:
    14 to 122°F (-10 to 50°C)
    Air, Argon, Helium, Nitrogen, Oxygen, and other non-reacting gases
    5 - 95% Relative Humidity
    Noise Level2:
    As low as 50dB
    Pump Assembly Rated Life3:
    PMDC Iron Core Brush -
    Up to 2,400 hrs
    Brushless- Minimum 3,500 hrs
    53 oz. (1502 g) - Single Head with
    PMDC Iron Core Brush Motor
    61 oz. (1729 g) - Twin Head with
    PMDC Iron Core Brush Motor
    49 oz. (1381 g) - Twin Head with
    Brushless Motor
    Motor Type:
    PMDC Iron Core Brush, Brushless
    Nominal Motor Voltages4:
    12, 24 VDC
    Max Power at Nominal Voltage:
    39 Watts - Single Head PMDC Iron
    Core Brush
    69 Watts - Twin Head PMDC
    Iron Core Brush
    72 Watts - Twin Head Brushless
    Electrical Termination:
    2-wire (analog or PWM) - PMDC
    Iron Core Brush
    Multi-wire 24V Power, 0-5V Speed
    Control - Twin Head Brushless
    Current Range5:
    1.0 - 5.7 A
    PMDC Iron Core Brush Motor:
    12 VDC:
    0.50 mH max @ 1kHz/50mV
    24 VDC:
    2.0 mH max @ 1kHz/50mV
    Brushless Motor:
    24 VDC:
    0.73 mH max @ 1kHz/50mV
    Head Configuration:
    Single, Twin
    Maximum Flow:
    32 LPM - Single Head
    66 LPM - Twin Head
    Maximum Intermittent Pressure6:
    22 psi (1517 mbar)
    Maximum Continuous Pressure:
    8 psi (552 mbar)
    Maximum Intermittent Vacuum6:
    24 in Hg (610 mm Hg)
    Maximum Continuous Vacuum:
    12 in Hg (310 mm Hg)
    40 micron - recommended
    Efficiency at Free Flow7
    Single Head PMDC Iron Core
    Brush Motor: 3.6 LPM/Watt
    (P/N: T1-1HD-12-1NEA)
    Twin Head PMDC Iron Core Brush
    Motor: 3.6 LPM/Watt
    (P/N: T1-2HD-12-1NEA)
    Twin Head Brushless Motor:
    4.4 LPM/Watt
    (P/N: T1-2BL-24-1NEA)

    Wetted Materials
    Diaphragm: EPDM Valves & Gasket: Neoprene Head: PPS, PTFE

    Typical Flow Curve

    The above graphs represent examples of performance for the pumps series handling air at 800 feet (244M) above sea level at 75° F (24° C). Performance will vary depending on barometric pressure and media temperature. Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows, depending on specific customer requirements.
    Please contact Parker Precision Fluidics Applications Engineering for other considerations

    Sizing and Selection

    Mechanical Integration

    Electrical Integration and Motor Control
    If application requires variable flow, motor control options are available, as follows:

    Typical Flow Diagram

    Ordering Information