Parker Air Filter
Parker Pharmacetical Filter
Tygon® Tubing
Pharmed® Tubing
Bio & Pharmacetical Tubing
Medical Tubing
Norprene® Tubing
Fluran® Tubing(viton Tubing)
Tygon® Silicone Tubing
Teflon Tubing
Flanged Tubing
PEEK™ & PEEKsil™ Tubing
Stainless Steel Tubing
Capillary Tubing
Mitos-R Hose
Mitos-W Hose
Mitos-WCO Hose
정밀연동펌프
Miniature Pumps
Inchpore® Syringe filter
Inchpore2® Syringe filter
Inchpore® Membrane Filter
Auto Sampler Vial Cap & Septa
Headspace용 Septa
New objective
Upchurch
안정성 시험챔버
광안정성 시험챔버
고압멸균기(AutoClave)
사이클 시험챔버
UPS(무정전 동력공급장치)
   
 
   
 
   
PUMP
Miniature Pumps
Precision Syringe Pump Micro Pumps (air/gas) Mini Pumps (air/gas)
Mini Pumps (liquids) High Capacity Pumps (air/gas)  

Miniature Diaphragm Pumps (air/gas)
BTC Series
Versatile pump series for multiple applications - up to 6 LPM
 


Typical Applications
  • Gas Analysis
  • Anesthesia Monitors
  • CO2 Monitors
  • Patient Monitoring
  • Wound Therapy
  • Urinalysis
  • Medical/Training Mannequin
  • BTC Miniature Diaphragm Pumps are a series of brush and
    brushless DC motor driven pumps, which are tailored to meet
    specific application performance requirements. An innovative
    compact design incorporates leading edge technologies that allow
    them to operate more efficiently than existing pump designs. BTC
    Pumps offer multiple component configurations allowing them to
    be used for either vacuum, pressure, or alternating vacuum and
    pressure operations. BTC series is ideal for a wide range of
    pressures and low noise applications.
     
    Features
  • Innovative and efficient engineering designs enable the BTC Series
        to push the performance envelope in a lightweight, compact size.
  • Using our proprietary advanced diaphragm elastomer and superior
        brushless motor design sets the highest benchmark for servicefree
        operation that exceeds 10,000 hours.
  • Incorporating the lightweight EZ Mount Accessory facilitates
        simple system assembly while dampening vibration and
        reducing noise levels.
  • RoHS compliant.

  • Product Specifications
    Physical Properties
    Operating Environment1:
    41 to 122°F (5 to 50°C)
    Storage Environment:
    -4 to 212°F (-20 to 100°C)
    Media:
    Air, Argon, Helium, Nitrogen, Oxygen, and other non-reacting gases
    Humidity:
    0 - 80% Relative Humidity
    Noise Level2::
    As low as 45 dB @ 12 in (30 cm) Muffler recommended for additional noise reduction (see accessories)
    Pump Assembly Rated Life3:
    PMDC Iron Core Brush - 3,500 hrs
    Brushless Slotted - 10,000 hrs
    Brushless Slotless - 10,000 hrs
    Weight:
    6.5 oz. (184 g) PMDC Iron Core Brush
    4.5 oz. (128 g) Brushless Slotted
    7.4 oz. (210 g) Brushless Slotless
    Electrical
    Motor Type (DC):
    PMDC Iron Core Brush,
    Brushless Slotted, Brushless Slotless
    Nominal Motor Voltages (DC)4:
    6, 12, or 24 VDC
    Other voltages available upon request
    Electrical Termination:
    PMDC Iron Core Brush: 22 AWG
    Wire Leads, Length 10” (254 mm)
    Brushless Slotted Motor: 22 AWG
    Wire Leads, Length 20” (508 mm)
    Brushless Slotless: 22 AWG Wire
    Leads Length 20” (508 mm)
    Current Range5:
    50 - 900 mA

    Wetted Materials
    Diaphragm: EPDM, AEPDM, FKM
    Valves: EPDM, FKM
    Pump Head:
    Vectra (Liquid Crystal Polymer)
    Pneumatic
    Head Configuration: Single
    Maximum Unrestricted Flow:
    6 LPM
    Pressure Range:
    0 - 30 psig (0-1.93 bar) Flat
    0 - 20 psig (0-1.38 bar) Convoluted
    Vacuum Range:
    0 - 23 in Hg (0-584 mm Hg) Flat
    0 - 20 in Hg (0-508 mm Hg)
    Convoluted
    Filtration:
    40 microns - recommended
    Efficiency at Free Flow6:
    PMDC Iron Core Brush:
    1.2 LPM/Watt (PN: C103E-13)
    Brushless Slotted:
    1.4 LPM/Watt (PN: C134D-13)
    Brushless Slotless:
    1.5 LPM/Watt (PN: C190-12)

    Performance Specifications

    The above graphs represent an example of performance for the pump series handling air at 800 feet (244 m) above sea level at 75 degree F (24 C). Performance will vary depending on barometric pressure and media temperature. A variety of configurations can be accommodated to meet application requirements. Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows depending on specific customer requirements.
    Please contact Parker Precision Fluidics Applications Engineering for other considerations.

    Sizing and Selection


    Mechanical Integration

    Electrical Integration and Motor Control

    Pulse Width Modulation (PWM)

    Typical Flow Diagram


    Accessory Information

    [ EZ Mount available ]
    EZ Mount provides ease of installation and effective control of
    vibration transfer. EZ Mount was designed to mount easily to the
    Precision Fluidic BTC Family of diaphragm pumps.
     
    - Features
  • Isolation feet on the EZ mount can be rotated in any one of three ninety-
        degree planes and is designed for top-down or bottom-up mounting
        providing simple installation.
  • EZ Mount was designed to minimize weight added to the pump assembly.
        Approximate weights are: Style A - 0.63 oz (18 g), Style B - 0.71 oz (20 g).
  • Effectively absorbs vibration to minimize most vibration-induced noise and
        vibration transfer into an instrument.
  • Designed to keep height and size to a minimum.
  • Engineered for Parker BTC pumps to ease integration into your system.

  • - Physical Properties
    Operating Environment: 41 - 158°F (5 - 70°C) Feet: Silicone
    Humidity: 0 - 95% Relative Humidity Feet Insert: Brass
    Base Plate: Noryl GTX830 Hardware: Zinc-Plated Steel
    EZ Mount kits include all necessary hardware and detailed instructions.
    Isolation Feet are available in either threaded or thru-hole clearance for standard #4-40 or #6-32 (M3 for clearance hole only) hardware and can be mounted in any of three ninety-degree planes.
     
    - Dimensions

    Ordering Information