Parker Air Filter
Parker Pharmacetical Filter
Tygon® Tubing
Pharmed® Tubing
Bio & Pharmacetical Tubing
Medical Tubing
Norprene® Tubing
Fluran® Tubing(viton Tubing)
Tygon® Silicone Tubing
Teflon Tubing
Flanged Tubing
PEEK™ & PEEKsil™ Tubing
Stainless Steel Tubing
Capillary Tubing
Mitos-R Hose
Mitos-W Hose
Mitos-WCO Hose
정밀연동펌프
Miniature Pumps
Inchpore® Syringe filter
Inchpore2® Syringe filter
Inchpore® Membrane Filter
Auto Sampler Vial Cap & Septa
Headspace용 Septa
New objective
Upchurch
안정성 시험챔버
광안정성 시험챔버
고압멸균기(AutoClave)
사이클 시험챔버
UPS(무정전 동력공급장치)
   
 
   
 
   
PUMP
Miniature Pumps
Precision Syringe Pump Micro Pumps (air/gas) Mini Pumps (air/gas)
Mini Pumps (liquids) High Capacity Pumps (air/gas)  

Micro Diaphragm Pumps (air/gas)
CTS Series
High performance in a compact 20 mm wide pumps - up to 2.5 LPM
 

Typical Applications
  • Gas Analyzers
  • Patient Monitoring
  • CO2 Monitors
  • Compression Therapy
  • Negative Pressure Wound Therapy
  • Surgical Instruments
  • Medical Consumer Devices
  • Parker’s CTS Micro Diaphragm Pump Model delivers up to 2.5 slpm
    of flow into a compact 20 mm wide package. Configurable with
    three different motors to meet your application’s specific needs and
    life expectations
     
    Features
  • CTS Series Pumps set the highest benchmark for service free life-
        expectancy with our advanced proprietary diaphragm elastomer.
  • CTS Series Pumps have a unique, compact, and lightweight design
        making it ideal for portable applications.
  • Our 100% oil and grease-free pump and compressor design
        maintains the purity of your system and are commonly used in
        FDA-approved systems.
  • CTS Series Pumps are uniquely balanced to minimize noise and
        vibration and to maximize life.
  • RoHS compliant.

  • Product Specifications
    Physical Properties
    Operating Environment1:
    41 to 122°F (5 to 50°C)
    Storage Environment:
    -4 to 212°F (-20 to 100°C)
    Media:
    Air, Argon, Helium, Nitrogen, Oxygen,and other non-reacting gases
    Humidity:
    0 - 80% Relative Humidity
    Noise Level2::
    As low as 45 dB @ 12 in (30 cm) Muffler recommended for additional noise reduction (see accessories)
    Pump Assembly Rated Life3:
    PMDC Iron Core Brush - 1,500 hrs
    Coreless Brush - 3,000 hrs
    Brushless Slotless - 10,000 hrs
    Weight:
    1.7 oz. (48 g) PMDC Iron Core Brush
    1.6 oz. (45 g) Coreless Brush
    2.2 oz. (62 g) Brushless Slotless
    Electrical
    Motor Type (DC):
    PMDC Iron Core Brush
    Coreless Brush
    Brushless Slotless
    Nominal Motor Voltages (DC)4:
    PMDC Iron Core Brush:
    6, 9, 12, 24 VDC
    Coreless Brush: 6, 9, 12, 24 VDC
    Brushless Slotless: 6, 9, or 12 VDC
    Other voltages available upon request.
    Electrical Termination:
    Iron Core Brush: Metal Terminals
    Brush: 24 AWG Wire Leads,
    Length 20" (508 mm)
    Brushless Slotless: 24 AWG Wire
    Leads, Length 20" (508 mm)
    Current Range5:
    240 - 880 mA
    Pneumatic
    Head Configuration: Single
    Maximum Unrestricted Flow:
    2.5 LPM
    Pressure Range:
    0 - 24 psig (0 - 1.65 bar)
    Vacuum Range:
    0 - 20 in Hg (0 - 508 mm Hg)
    Filtration:
    40 microns - recommended
    Efficiency at Free Flow8:
    PMDC Iron Core Brush: 1.7 LPM/Watt
    (PN: E107-12-090)
    Coreless Brush: 2.8 LPM/Watt
    (PN: E165-11-060)
    Brushless Slotless: 1.8 LPM/Watt
    (PN: E247-12)

    Wetted Materials
    Diaphragm: EPDM, AEPDM, Viton
    Valves: EPDM, AEPDM, Viton
    Pump Head: PSU (Polysulfone)


    Performance Specifications

    The above graphs represent an example of performance for the pump series handling air at 800 feet (244 m) above sea level at 75°F (24°C). Performance will vary depending on barometric pressure and media temperature. A variety of configurations can be accommodated to meet application requirements. Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows depending on specific customer requirements.
    Please contact Parker Precision Fluidics Applications Engineering for other considerations.

    Sizing and Selection


    Mechanical Integration

    Electrical Integration and Motor Control

    Typical Flow Diagram

    Accessory Information


    Ordering Information