Parker Air Filter
Parker Pharmacetical Filter
Tygon® Tubing
Pharmed® Tubing
Bio & Pharmacetical Tubing
Medical Tubing
Norprene® Tubing
Fluran® Tubing(viton Tubing)
Tygon® Silicone Tubing
Teflon Tubing
Flanged Tubing
PEEK™ & PEEKsil™ Tubing
Stainless Steel Tubing
Capillary Tubing
Mitos-R Hose
Mitos-W Hose
Mitos-WCO Hose
Miniature Pumps
Inchpore® Syringe filter
Inchpore2® Syringe filter
Inchpore® Membrane Filter
Auto Sampler Vial Cap & Septa
Headspace용 Septa
New objective
안정성 시험챔버
광안정성 시험챔버
사이클 시험챔버
UPS(무정전 동력공급장치)
Miniature Pumps
Precision Syringe Pump Micro Pumps (air/gas) Mini Pumps (air/gas)
Mini Pumps (liquids) High Capacity Pumps (air/gas)  

Precision Aspirate and Dispense Syringe Pump
Smart Syringe Pump
Miniature long life high resolution precision syringe pump
  • Clinical Diagnostics
  • Analytical Chemistry
  • Typical Applications
  • Sampling
  • Reagent Addition
  • Liquid Handling
  • Precision Flow Control
  • At one third the size and weight of standard 30mm syringe pumps,
    the Parker Smart Syringe Pump improves the performance of Clinical
    Diagnostic and Analytical Chemistry systems by improved resolution
    and bringing the pump to the point of dispense. This long life pump is
    designed to a minimum of 5 million cycles, improving system reliability
    and reducing downtime. Its lightweight and compact size enables
    smaller instrument designs, decreasing instrument costs and footprint.
  • Designed to a minimum of five million cycle life
  • Encoded servo motor with 228,495 step resolution improves low
        volume and low flow performance
  • Non pulsatile flow down to 7.5 nL/sec
  • Can be mounted directly on motion systems placing it directly at the
        point of aspirate and dispense
  • Eliminates transfer lines; simplifies fluidic designs, reduces
        footprint and instrument cost
  • Easy drop in replacement for existing syringe pumps
  • CE and RoHS Compliant

  • Product Specifications
    Drive Type:
    Lead nut screw with guide rail, Servo
    motor with high resolution encoder
    ≤0.1% CV full stroke
    ≤0.5% CV 10% of full stroke at point
    of dispense (measured fluidically)
    ± 1.0 % full stroke
    ± 2.0 % at 10% full stroke at point
    of dispense (measured fluidically
    228,495 steps full scale
    0.22nL per step (50 μL syringe)
    Minimum Flow Rate:
    7.5 nL/sec (50 μL syringe), non
    pulsatile flow
    Stroke Speed:
    1 sec to 111 minutes full stroke
    Valve Switching Speed:
    <50 msec open/close
    29 PSIG (2.0 bar)
    Syringe Barrel Volumes Supported:
    50 μL to 1mL, Standard 30 mm
    XP type syringe barrels

    Physical Properties
    Operating Environment:
    15° to 40° C,
    20% to 90% Relative Humidity
    Storage Environment:
    -20° to 70° C,
    20% to 90% Relative Humidity
    Drive Dimensions:
    0.69" (17.5 mm) x 4.1" (104 mm)
    x 6.35" (162 mm)
    0.81 Ibs (367g)
    3 way diaphragm isolated
    solenoid valve
    Pump Assembly Rated Life:
    5 Million Cycles
    ¼-28 flat bottom female fittings for
    fluid connections and syringe
    Recommended Filtration:
    100 mesh or 150 μm

    12 Pin Molex® Micro-Fit Connector
    24 VDC ± 5%,<1 Amp
    Command Set:
    Cavro® scripting language
    Smart Syringe Pump command
    Interface: CAN, RS-232
    Baud Rate: RS232: 9,600, 14,400,
    19,200, 38,400, 57,600 and 115,200
    CAN: 20K, 50K, 125K, 250K, 500K,
    800K and 1M bits per second
    Up to 127 pumps can be daisy
    chained and addressed individually
    RS 232 Format:
    Data Bits: 8, Parity: None,
    Stop Bits: 1, Half Duplex

    Wetted Materials
    Polyetherimide (ULTEM® 1000)
    Valve Body:
    Valve Diaphragm and Gasket:

    Electrical Interface

    Fluidic Interface

    Wetted Materials and Dimensions

    Mounting Dimensions

    Typical Flow Diagram


    Smart Syringe Pump Software Libraries and Control

    Fluid Flow Diagrams

    Chemical Compatibility Chart*


    Ordering Information