Parker Air Filter
Parker Pharmacetical Filter
Tygon® Tubing
Pharmed® Tubing
Bio & Pharmacetical Tubing
Medical Tubing
Norprene® Tubing
Fluran® Tubing(viton Tubing)
Tygon® Silicone Tubing
Teflon Tubing
Flanged Tubing
PEEK™ & PEEKsil™ Tubing
Stainless Steel Tubing
Capillary Tubing
Mitos-R Hose
Mitos-W Hose
Mitos-WCO Hose
정밀연동펌프
Miniature Pumps
Inchpore® Syringe filter
Inchpore2® Syringe filter
Inchpore® Membrane Filter
Auto Sampler Vial Cap & Septa
Headspace용 Septa
New objective
Upchurch
안정성 시험챔버
광안정성 시험챔버
고압멸균기(AutoClave)
사이클 시험챔버
UPS(무정전 동력공급장치)
   
 
   
 
   
PUMP
정밀연동펌프
ChemTec System FilterTec System LabTec System MabTec System
 
LabTec™
Smart Dispensing Systems

  • LabTec™ dispenses by volume, weight or weight ratio (dilution by weight)
  • Improves the speed, precision and accuracy of the entire
        sample preparation process
  • In-line fi lter sterilization eliminates the need for costly and
        time-consuming autoclaving of diluent
  • Controlled solvent delivery system enhances employees’ safety
  • Automatically provides critical GLP documentation


  •  
    Dispenser and Diluter
    The LabTec™ automates, optimizes and documents repetitive liquid dispensing with or without in-line fi lter sterilization. The LabTec CP models are Ideally suited for dispensing sterile solutions in Media Kitchens and Microbiology Laboratories. Also widely used in small production runs to fi ll
    your fi nal product into vials, bottles, bags, containers.
     

    LabTec™ Peristaltic Models Feature and Benefit Summary:
  • Rapid, high precision dispensing by volume from ml to liters. SciLog has performance validations that give you
        the aliquot, speed of dispense and the precision level. If you need to dispense larger aliquots,
        go to the SciLog Fill Master, which can quickly and with high precision fi ll 5 liters in 35 sec!!
  • Dispense by weight or volume, typical precision 0.5% or better
  • Dispensing/fi lling with in-line fi lter sterilization
  • Sample weighing and auto-diluting capability
  • Pump options: Piston and Magnetic Gear are available for pump- ing organic solvents, monomers, etc.
        Use peristaltic CP-200 for sterile fi lling of test tubes, vials, bottles.
  • Pressure alarm alerts when in-line fi lter needs to be replaced
  • Complete documentation of dispensing
  • Use Magnetic Gear MP-320 for non-sterile fi lling or use with sterilizing fi lter for sterile fi lling. Performance
        validation: print-out of dispensing data.
  • Self-Priming
  • Protection against pump overload
  • Reversible Flow (Bidirectional Flow)
  • High precision microprocessor pump with optically encoded, servo-controlled motor



  • LabTec™ Applications
    1. Automated Weighing & Dilution of Food Samples With In-Line Media Sterilization
    The LabTec™ significantly increases the productivity of any Microbiology Laboratory. The dispensing system automates weighing and diluting of food samples in preparation for bacteriological analysis. Only an approximate sample size is needed. The LabTec™ dispenser calculates and rapidly dispenses the media required to achieve a user-
    selected dilution factor.


    Costly and time-consuming autoclaving of media is avoided with in- line fi lter sterilization of diluents using a Pall “SuporCap 50” fi lter capsule. A disposable pressure sensor monitors fi lter backpressure and provides an alarm signal when a failing sterilizing fi lter (high backpressure) needs to be replaced. An optional printer or PC hook-up automatically documents all sample and diluent weights. The LabTec dispenser improves the speed, precision and accuracy of the entire sample preparation process by automating the weighing, dilution and documentation process.
    2. High Speed, High Precision Volumetric Batch Dispensing
    The LabTec Smart Dispensing System is capable of high speed, high precision batch dispensing. The LabTec comes with a 1082 Tandem peristaltic pump head. Up to 10 different dispensing volumes can be stored and easily retrieved for quick batch volume dispensing. An optional sterilizing fi lter and disposable pressure sensor provide for in-line buffer sterilization and reliable detection of fi lter plug-up conditions. Typical performance results including dispensing times are summarized in Table below:

    The LabTec is easy to calibrate. A stored calibration curve is provided for each pump head/pump tubing combination. From a stored menu, you select the pump tubing you have installed in the LabTec. For high accuracy dispensing applications, you may want to use the LabTec™ single-point re-cal feature.
    3. Organic Solvent Dispensing: Preparation of HPLC Mobile Phase and Extraction Solvents
    In this configuration, the LabTec solvent delivery system is a walkup dispensing station. The user selects the solvent volume then presses a front panel key or foot switch to initiate the dispensing cycle. The LabTec provides high precision, high accuracy dispensing from milliliters to liters.
    The LabTec automates the safe and accurate dispensing of solvents typically supplied in pressurized, stainless steel (SS) containers (i.e. J.T. Baker CYCLE-TAINER). The closed, inert-gas-blanketed SS container and Teflon fluid lines eliminate any solvent contamination and degradation.

    The LabTec solvent delivery system maintains solvent purity while reducing hazardous solvent waste. The LabTec controlled solvent delivery system enhances employees’ safety by reducing solvent spills and hazardous vapor exposures.
    Volumetric dispensing accuracy is assured with a simple, single key re-calibration feature. Alternatively, dispensing by weight eliminates the need for pump calibration but will require hook-up to an electronic scale. For ease of use, up to ten user-defined dispensing volumes can be stored in the LabTec. All dispensing data are printed out or sent to your PC for data archiving.
    4. Biopharmaceutical GMP Filling Application:
         High Accuracy Dispensing with In-Line Filter Sterilization
    In this configuration, the LabTec is connected to an electronic scale for high accuracy, GMP filling applications. A sterilizing filter and a disposable pressure transducer provide a safe and effective in-line filter sterilization capability. The LabTec continuously monitors the filter backpressure and alarms when a user-defined pressure level has been exceeded, which indicates a filter plug-up condition.

    The high dispensing accuracy is achieved by reducing the pump rate as the target weight is being approached. The slow-down avoids overshooting the target weight. After slow-down, the LabTec pump stops briefly when 99% of the final target weight has been dispensed. The electronic scale is allowed to come to a steady-state readout and the LabTec slowly starts up again to dispense the remaining solution.
    Scale Up with Scilog Liquid Handling Systems
    Take advantage of SciLog’s liquid handling know-how. SciLog can provide you with automated, customized liquid handling technology for laboratory, pilot plant and production. Whether you need to fill syringes or aseptically transfer solution into single-use storage bags, SciLog has the appropriate system for you.


    Specifications
    Dimension: Width: 5.75 in (14.6cm); Height: 8.5 in (212.6); Depth: 11in (27.9).
    Weight: 14 lbs (6.4kg).
    Enclosure: 16 Ga, aluminum baked epoxy blue.
    LabTec™ Models: Optimal range for precision and speed of dispensing
  • CP-120:
  • 0.2 ml to 50 ml aliquots of low viscosity, aqueous liquids. Typical precision 0.5% by vol.
    Tandem 1081 peristaltic pump head with variable speed max. 160 RPM motor.
  • CP-200:
  • 10 ml to 2 liter aliquots of low or high viscosity liquids. Typical precision 0.5% by vol. Use with any
    thick, viscous liquids. Tandem 1082 peristaltic pump head with variable speed max. 600 RPM motor.
    Tandem 1081 uses Masterflex peristaltic pump tubing (thin-walled) sizes: #13, 14, 16, 25, 17 & 18.
    Tandem 1082 uses Masterflex peristaltic pump tubing (thick-walled) sizes: #15, 24 & 35.
  • MP-320:
  • 4 ml to 3 liter aliquots of organic solvents, low viscosity. Typical precision 0.5% by vol. liquids.
    Magnetic gear head, 316SS chamber with Teflon gears with variable speed max. 3400 RPM motor.
    Pressure Range: Tandem Head Pump
    Maximum pressure output at tandem peristaltic pump head is 45 psi. Has single point recalibration feature.
    Pressure Displayed: Pressure displayed with a resolution of 0.1 psi; choice of bar, psi, kpa.
    Pressure Sensors Options:
    Use with sterilizing filters to monitor filter back pressure and to alarm when need to change filter due to plugging up of filter.
    Power: 115/220-240 VAC, 60/50Hz, 75 Watts; double fused: T1AL 250V (CE: IR35A 250VAC)
    Re-Cal Feature: Factory installed calibration curve for all tubing sizes.
    Front panel Re-cal key for single-point pump recalibration.
    LabTec™ Balance Options:
  • Balance with capacity of 2,000 grams x 0.01 g and 8,100 g x 0.1 resolution are most popular.
  • Larger balance capacities up to 30 Kg x 0.1 g resolution available.
  • LabTec™ Software:
  • Dispenses by volume, rapidly and with high precision
  • Dispenses by weight, used with balance for rapid high precision filling by weight
  • Weight ratio, automates weighing and diluting process and sample prep process
  • Monitors back pressure of in-line sterilizing filters
  • Alarms when back pressure of in-line sterilizing filter is plugged up and can no longer be used
  • Documentation Software for PC:
  • SciDoc interface software with custom macros for Excel® data compilation. Sent to you ready to use.
  • Complete process documentation.
  • Real-time verification and documentation of process parameters.
  • Use Range: 4° to 40° C, 100% Humidity.
    Motor: Choice of three (3) motors: 160, 600 and 3,400 RPM at 24 VDC, 3.8 Amperes, variable pump speed,
    optically encoded, servo-controlled motors.
    I/O Ports:
    1) First serial port labeled “Balance”, Male DB9 connector for hook-up of electronic scale.
    2) Second Serial Port labeled “Printer”, Female DB9; also used to interface to PC for data storage in an Excel® file
        in your PC.
    3) External I/O port, Female DB37 connector; used for remote On/Off control of PureTec™ via footswitch.
    4) Optional pressure sensor interface available.
    Data Entry: Membrane keyboard with auditory feedback.
    LabTec Settings:
  • Save 10 Optimized Dispensing by Volume settings for rapid, high precision filling, from ml to liter aliquots;
        Typical precision of 0.5% by volume.
  • Save 10 Optimized Dispensing by Weight settings for rapid, high precision filling by weight from grams to
        kilograms aliquots; Typical precision of 0.3% by weight.
  • Save 10 Optimized Weight Ratio settings to automate the weighing and diluting process in sample preparation;
        Typical precision of 0.3% or better.
  • Document each dispense or dilution for GLP or for inventory control; print out or data sent to spreadsheet in PC.
        (SciDoc feature)